Refrigerator Repair Orlando is complex work best left to professionals. Professional service technicians use specialized tools and equipment to fix problems safely, accurately, and efficiently.
Check that the refrigerator is plugged in and not overheating. A dislodged plug or a faulty cord can stop your fridge from working properly.

Make sure the temperature controls are set to the recommended levels.
Check the Power
Many appliances use a small amount of energy even when they’re turned off. This is known as a phantom load. A refrigerator is no exception. If your refrigerator is plugged into a power strip, you can monitor it and avoid these costs by unplugging it when not in use.
Look for a sticker inside your fridge that lists its voltage and amps. This is its electrical rating or wattage, and you can calculate how much it uses by multiplying those numbers together (Volts x Amps = Watts). But since refrigerators cycle on and off throughout the day, you’ll need to divide this wattage number by three to get your average daily power usage.
Keep in mind that your refrigerator’s efficiency will be affected by things like how often you open the door, its location, and how full it is. Also, regularly clean your fridge’s condenser coils and make sure the seals are in good condition. This will ensure cold air doesn’t escape, forcing the refrigerator to work harder to maintain its temperature.
Check the Evaporator Fan
The evaporator fan is the one responsible for cooling the refrigerator’s food compartment. If it stops working, this can cause the fridge to warm up, even when it’s set at a lower temperature setting.
You can try to fix this problem yourself by unplugging the fridge, removing the back panel, and cleaning the evaporator fan. It’s important to keep in mind that you may need to replace the fan altogether. Make sure you’re buying a fan that is compatible with your refrigerator. It’s also a good idea to consult your owner’s manual, which can help you determine the best type of replacement fan for your fridge.
If you’re hearing unusual noises coming from your refrigerator, such as scraping or grinding, this could indicate that there’s something blocking the evaporator fan or that it’s loose. If you’re a DIYer, you can try to solve this refrigerator problem yourself by unplugging your fridge and removing the back panel. You can then clean the fan and check if it is blocked by anything, such as insulation or wires (or a mouse).
Another common refrigerator problem is water leaks. This can occur from the water inlet valve or dispenser, as well as the ice maker itself. If you see water pools around your refrigerator or notice that the icemaker isn’t working, this is a sign that it’s time to call a repair professional.
While you can take a few simple steps to troubleshoot a refrigerator that’s not cooling properly, it’s important to call in a professional for more complex repairs. Refrigerator repair technicians have specialized tools for dealing with refrigerator issues, and they can offer quick solutions that are cost-effective and efficient. In addition, they have access to genuine replacement parts, so they can guarantee a fast and effective fix. For example, if you’re looking for a reliable refrigerator repair service, look for one that offers free home quotes. This will save you time and money by allowing you to receive a quote quickly and easily online. You can then compare prices from multiple local refrigerator repair companies to find the best deal.
Check the Condenser Coil
The evaporator coil and the condenser coil work together to cool your home. Your air conditioner works much like your car’s radiator, transferring heat from the evaporator coil to the surrounding air to cool your home. The condenser coil, located outside the unit, works in the opposite way to absorb and disperse heat from the surrounding air. Both of these components require good air flow to transfer heat and perform at their best.
Both the evaporator coil and the condenser can become clogged with dust, which restricts the airflow they need to perform. This can be caused by a dirty filter, blocked ducts or a dirty coil. When these problems occur, you will notice a loss of cooling efficiency and possibly ice formation.
The condenser coil is usually located outdoors, where it can be exposed to the elements and environmental pollutants that can damage its components. Dirt, leaves, twigs, weeds and even pet hair can get trapped within the fins of the coil, reducing its ability to transfer heat and increasing strain on your system’s compressor and other components. Keeping the outdoor unit free of debris prevents this problem.
Over time, your condenser can also become corroded by excessive heat and humidity or chemically polluted air. This corrosion can affect the performance of your condenser and increase the likelihood of internal leaks or fin damage. Regular cleaning by a qualified HVAC technician helps to minimize the chances of these problems developing.
A clogged condenser can lead to overheating of your refrigerator’s compressor, which causes the entire unit to fail. This failure may not happen immediately, but it can cause a great deal of inconvenience for your family.
Both the evaporator and condenser coils require oil to lubricate their moving parts and provide proper function. However, improper installation or maintenance can result in excess oil building up inside the coils’ tubes. This can restrict heat transfer surfaces and reduce the amount of refrigerant available for evaporator re-lubrication.
In addition, the evaporator coil is often subjected to airborne pollutants that encourage the development of fungus and mold on its surface. These chemicals, known as volatile organic compounds (VOCs), can come from new carpeting and upholstery, pressed wood furniture, air fresheners, cleaning products and more. Ensure that your home has adequate ventilation to reduce these VOCs and keep them from contaminating your evaporator coil.
Check the Door Gasket
The door gasket seals the gaps around the perimeter of your refrigerator’s door and frame to prevent infiltration of sound, light, drafts, moisture, fire, and smoke. A well-functioning door gasket helps keep your food fresher longer, reduces waste and spoilage, and saves on energy bills. A variety of door gasket options exist, and selecting the right one for your refrigerator depends on a number of factors, such as whether it will be installed inside or outside of the freezer, its insulation properties, and the material it’s made of.
Expertly engineered to balance flexibility and durability, a quality refrigerator door gasket is designed to compress against the door frame when closed to create an airtight seal that stabilizes the internal temperature of the appliance. Proper maintenance of the door gasket ensures that this essential barrier remains in optimal condition, and catching issues early on can help you save money on your utility bills and prevent spoilage.
When the door gasket fails, it can lead to fluctuations in interior temperatures and excessive moisture accumulation that could promote mold and mildew growth. A faulty gasket can also strain other components, increasing the likelihood of costly repairs in the future. Regular inspections are critical to identifying signs of wear that may indicate the time for a replacement, such as visible cracks or hardened areas that compromise the integrity of the gasket.
When sourcing a new door gasket, it’s important to select a model that’s specifically designed for your refrigerator, as this ensures a perfect fit and enhances the longevity of your appliances. You can also find models that offer additional features, such as a fire-resistant construction, for extra protection and peace of mind.